FilterStream V2100 instruction manual W T O U S E Y O U R D I R T T a M E R C O R D L E S S V a C

H O W T O U S E Y O U R D I R T T A M E R ™ C O R D L E S S V A C

Remove your vacuum from the Charging Base and slide the On/Off Switch to the “On” position to operate. Slide the On/Off Switch to the “Off” position between cleaning tasks to conserve power.

P I C K I N G U P D R Y D E B R I S

Use your vacuum for picking up dirt, dust, food crumbs, etc. from counters, bare floors, rugs, automobile interiors, upholstered furniture, etc. After dry pickups, empty and clean the Bowl and Foam Filter before picking up liquid or wet spills.

Note: If using a HEPA Filter in place of the Foam Filter, shake loose, or brush off any dust or debris from the HEPA Filter if you notice any build-up.

DO NOT WASH OR RINSE THE HEPA FILTER,

as this may damage the HEPA material.

If the HEPA Filter accidentally gets wet from vacuuming wet spills, remove the HEPA Filter, pat it dry with a paper towel, and allow it to thoroughly air dry before next use.

P I C K I N G U P L I Q U I D S

O R W E T D E B R I S

Use your vacuum to pick up liquids or wet debris. For ideal performance, we recommend the use of the Foam Filter for liquid debris.

(a)For liquid pickups, insert the

Squeegee into the Bowl

Nozzle and pull the Squeegee through the liquid.

(b) Do not fill the Bowl beyond the end of the Pre-Filter

(about 9 oz. of liquid). If there is any liquid in the Bowl, hold the Bowl Nozzle down to avoid leakage. Tipping the Bowl Nozzle up may cause the liquid to enter the fan area.

(c)After picking up perishable spills (e.g. milk, juice, etc.), empty your vacuum’s Bowl and Pre- Filter immediately and thoroughly clean the Bowl, Pre-Filter, Filter Cover and Foam Filter to prevent mold and mildew from forming.

11