FilterStream V2100 instruction manual Foam Filter Cleaning

M A I N T E N A N C E / F I L T E R R E P L A C E M E N T

hand by grasping the pull-tab on top of the Pre-Filter with your fingers. Empty any dirt, debris, or liquid from the Bowl and Pre-Filter into the sink or wastebasket.

(c)Rinse or hand wash the Pre-Filter, Bowl and Filter Cover with water (if needed, with warm, soapy water).

Note: The Pre-Filter, Bowl and Filter Cover can be washed in the dishwasher (top rack only).

(d)Allow the Pre-Filter, Bowl and Filter Cover to dry. Then reinsert the Pre-Filter into the Bowl, snap the Filter Cover onto the Handle/Housing, and reattach the Bowl to the Handle/Housing.

C L E A N I N G / R E P L A C I N G F O A M A N D H E P A F I L T E R S

To remove/replace the Filter (either foam or HEPA) from the vacuum, please follow these steps:

(a)Remove the Filter

Cover from the vacuum

Handle/Housing.

a

(b) Remove the Filter from the Handle/Housing.

(c)Clean the Filter as follows.

Foam Filter Cleaning: b

Wash the Foam Filter in

warm, soapy water until clean. Allow the Foam Filter to dry before reinserting into the Handle/Housing.

Note: Use only mild soap. Avoid detergents, chemical cleaners or solvents as these may damage the plastic.

HEPA Filter Cleaning: Use your finger to lightly clean the paper surface of the HEPA Filter, clearing off any dirt, dust, and hair.

NOTE 1: Do not wash the HEPA Filter. Water will permanently damage the filter.

NOTE 2: Under normal household use, the HEPA Filter will last over one (1) year.

13