B A T T E R Y C H A R G I N G P R O C E D U R E
1.Plug the Charging Base into a 110/120 volt electrical outlet.
2.I M P O R T A N T :
Make sure that the On/Off switch is turned to the “Off” position before charging. Otherwise, your vacuum will not charge.
3.Slide the vacuum downward onto the Charging Base making sure that the vacuum firmly hooks onto the Charging Base (see Figure B). Your vacuum will begin charging and the LED Charge Indicator will glow to show charging is taking place.
NOTE: before first use, charge your vacuum for at least 24 hours .
4.To maintain a charge, keep the Charger plugged into a standard wall outlet at all times. When charging, the Charger may be warm to the touch. This is normal.
C H A R G E I N D I C A T O R
The red LED Charge Indicator is “on” when the vacuum is charging.
Wet/Dry Vacuum
Charging Base | Figure B |
8
