AC Wire-in Combination
Carbon Monoxide & Photoelectric Smoke Alarm
–120VAC Direct Wire with Battery Backup
–Alarm/Voice message warning system
–Front loading battery
Part Number 21007624 | Model |
Voice Warning
Warns of hazard by announcing “Fire, Fire” or “Warning, Carbon Monoxide”.
Peak Level Memory
Alerts user when the unit has detected CO concentrations of 100ppm or higher.
Smart Hush™
Silences the unit during nuisance alarm situations. (Smoke must be present before hush is activated)
Two LED’s
•Red – Alarm mode.
•Green – Indicates that AC power is present.
Front Load Battery Door
Adjustable Mounting Bracket
Allows for easy installation and alignment.
Description
The Kidde
Alarm Warnings
Fire: The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “FIRE! FIRE!”. The alarm will repeat pattern until unit is reset or smoke is eliminated.
Carbon Monoxide: Four short alarm beeps followed by a verbal warn- ing “WARNING! CARBON MONOXIDE!” This continues until the unit is reset or the CO is eliminated.
Low Battery: One chirp followed by warning “LOW BATTERY”. The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The “LOW BATTERY” warning will only sound once every fifteen minutes.
Voice Hush Indication: “HUSH ACTIVATED” and “HUSH CANCELLED” voice announcement
Alarm Memory: The green LED will blink once every 16 seconds to alert a user when the unit has alarmed for smoke or has detected a concentration of CO. If the alarm has detected a CO level of
100ppm or greater, when the Test/Reset button is pressed the |
|
unit will announce “CO PREVIOUSLY DETECTED”. | SIGNALING |
If the alarm has detected abnormal levels | |
of smoke since its last test, it will produce | UL |
three rapid beeps. |
|
Features and Benefits
•
•
•Unique Battery Door Design – Will not close if battery is not installed properly.
•Voice Warning – Supplements warning from the traditional
•Photoelectric smoke sensor – May detect visible fire particles associated with slow smoldering fires sooner than an ionization sensor.
•Electrochemical CO sensor – Provides accurate and continual CO protection during the product’s life, remains stable during temperature and humidity changes and resists reactions to household gases that may cause false readings or reduce sensitivity.
•Smart Touch Button – One button performs the following functions:
(will announce “Hush mode activated,” or “Hush mode cancelled.”)
detected” if unit has detected levels of 100 ppm or higher)
6 minutes of reset if 70ppm or more of CO is present).
•Tamper Resistant – Unit will lock to mounting bracket and battery door will lock to deter theft or tampering.
•Green LED – Will flash every 30 seconds to indicate proper operation.
•Red LED – Flashes in conjunction with the alarm sounding.
•End of Life Signal – Seven years after initial power, the unit will “chirp” twice every 30 seconds to indicate the need to immediately replace the alarm.
•Low Battery Signal – Will chirp every minute and red LED will flash to indicate low battery condition.
•Interconnectable – Will interconnect with up to 24 other devices (18 of which can be initiating) including smoke, CO and heat alarms.