Setting Up Your

DW-700/702 Security System

GENERAL PRECAUTIONS

Use only the power supply provided with the system.

Unplug the power supply when the system is not in use for extended periods.

Do not place any of the equipment near a radiator, vent, or other place where it might be exposed to heat, moisture, dust, vibrations, or strong magnetic fields.

Do not attempt to repair the camera. Contact a qualified technician or the dealer for service. Any change or modification may damage the equipment and invalidate the warranty.

When installing the camera, follow manufacturer’s advice when using power tools, steps, ladders, etc. and wear suitable protective equipment (e.g., safety goggles) when drilling holes. Before drilling holes through a ceiling, check for hidden electricity cables and water pipes.

INSTALLING THE CAMERA

1Select the position for the camera and secure the camera stand.

Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.

2Screw the camera onto the bracket.

7

Page 11
Image 11
First Alert DW-702 user manual Setting Up Your DW-700/702 Security System, General Precautions, Installing the Camera