SYSTEM OPERATION
MULTI CHANNELS IDLE DISPLAY SETUP 5
MULTI CHANNELS IDLE DISPLAY SETUP
Multi Channels Idle Display Setup Menu
Select SYSTEM SETUP, press MENU to enter. Use to select MULTI CHANNELS IDLE DISPLAY.
Use to highlight DISPLAY QUAD DURING IDLE / AT 5 SEC INTERVALS / AT 10 SEC INTERVALS / AT 15 SEC INTERVALS. Press MENU to confirm selection. Press ESC to save and exit. NOTE: (1) Camera ON/OFF setting in CAMERA SETUP section will affect which camera(s) can be displayed during IDLE DISPLAY. (2) Audio (single channel at anytime) will be available during QUAD mode (by default on channel 1 or the next available channel with camera paired to system), single FULL screen mode (auto switch to channel viewing at the time), or channel triggered by motion. (3) Audio channel will stay connected until channel switched. (4) If set to 5/10/15 sec. interval then select SCAN ACTIVATED CAMERAS to achieve this display mode.
Idle Display - QUAD | Idle Display - 5 Seconds |
Idle Display - 10 Seconds | Idle Display - 15 Seconds |
Page 21