First Alert FA145C user manual Armed *Instant, Using the, 7INSTANT Key, With Entry Delay Off, Stay

Using the

7INSTANT Key

BEFORE ARMING, make sure all doors and windows are closed. Refer to

CHECKING FOR O P E N ZONES on page 13.

THE INSTANT MODE ARMS THE PERIMETER (INCLUDING THE ENTRY/ EXIT DOOR), WITH NO ENTRY DELAY.

PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY

ARMING PERIMETER ONLY

WITH ENTRY DELAY OFF

Use this key when staying inside and do not expect anyone to use an entry/exit door.

1.Enter your security code and press the INSTANT key.

2.The keypad beeps three times and displays the armed message. The red ARMED indicator lights. Note that there is an exit delay in effect before arming actually takes place. See the note below.

3.After arming, an alarm sounds immediately if any protected perimeter door or window is opened, but you may otherwise move freely throughout the premises.

An alarm sounds immediately if anyone opens an entry/exit door.

If you wish to open the entry/exit door to let someone in after arming INSTANT, you can re-start the exit delay at any time – simply press the [✱] key , and then let that person in. This will avoid having to disarm the system and then re-arm it again.

Note: When you first arm the system in the INSTANT mode, “You may exit now” will be displayed on an Alpha keypad during the programmed exit delay. This delay is in effect in the system even when arming INSTANT. When the exit delay period ends, “You may exit now” disappears and the system is then fully armed in the INSTANT mode.

TYPICAL DISPLAYS – “ARMED INSTANT”

	AC	ARMED *INSTANT*
STAY
		YOU MAY EXIT NOW
INSTANT
		➚	ALPHA
FIXED-WORD
	The message “you may exit now”

disappears when the exit delay expires.

– 17 –