First Alert FA148CP $Uplqj&Rppdqgv, Mode Press these keys… Keypad Confirms By…, Quick Arming

$UPLQJ￿WKH￿6\VWHP

$UPLQJ￿&RPPDQGV

Before arming, close all perimeter doors and windows and make sure the Ready to Arm message is displayed.

Mode	Press these keys…	Keypad Confirms By…
Stay	security code + [3] (STAY)	• three beeps
		• armed STAY message displayed
		• red ARMED indicator lights
Night-Stay	security code + [3] + [3]	• three beeps
		• NIGHT-STAY message displayed
		• red ARMED indicator lights
Instant	security code + [7] (INSTANT)	• three beeps
		• armed STAY message displayed
		• red ARMED indicator lights
		Note that entry delay is turned off.
Away	security code + [2] (AWAY)	• two beeps, or, if programmed, beeping for
		duration of exit delay
		• armed AWAY message displayed
		• red ARMED indicator lights
		Leave the premises through an entry/exit
		door during the exit delay period to avoid
		causing an alarm. The keypad beeps rapidly
		during the last 5 seconds of the exit delay to
		warn you that it is ending.
Maximum	security code + [4] (MAXIMUM)	• same as Away (described above)
		Note that entry delay is turned off.

Quick Arming

If "Quick Arming" was programmed by the installer, the [#]key can be pressed in place of the security code when arming the system. However, the security code

must always be used to disarm the system.

Function Key Arming

For any arming command, a function key may have also been programmed for your system. If so, you can press and hold the appropriate function key for 2 seconds to arm the system. See your installer for the designated functions (see Single Button Arming section).

Refer to the Accessing Other Partitions section for information on multi-partiion arming (FA168C).

– 15 –