First Alert MODEL FCD3N user manual How To Install Your Co Alarm, Installing the 9V Battery

HOW TO INSTALL YOUR CO ALARM

Read “Where To Install Your CO Alarm” before starting. This CO Alarm can be used on a tabletop or mounted on the wall. For tabletop use, choose a table no taller than 36” (92 cm); a fall from a high table could damage the Alarm’s sensitive components.

Before you start installation, find the pair of self-adhesive labels included with this CO alarm. On each label write in the phone number of your emergency responder (like 911) and a qualified appliance technician. Place one label near the CO Alarm, and the other label in the “fresh air” location you plan to go if the alarm sounds.

NOTE:

A qualified appliance technician is defined as “a person, firm, corporation, or company that either in person or through a representative, is engaged in and responsible for the installation, testing, servicing, or replacement of heating, ventilation, air conditioning (HVAC) equipment, combustion appliances and equipment, and/or gas fireplaces or other decorative combustion equipment.”

Installing the 9V Battery

1. Slide the mounting bracket/battery door off the back of the CO Alarm.

2. Attach the 9V battery (included) to the battery connector inside the battery compartment. Make sure the battery snaps in securely, and cannot be shaken loose.

3. Place the battery and connector back inside the battery compartment.

IMPORTANT!

For your safety, the CO Alarm will not close until a 9V battery is installed.

8