First Virtual Communications PS1010-3A General information, Warranty terms and conditions

PS1010 is in its current mode and the Amp indicator is also ON. But rotating current controller knob does not affect the display value.

•You are at the current mode and at this mode the display shows only the actual current draw by the DUT. But rotating the current controller knob means changing the Max current limit. To see the max current limit, C-SET button should be pressed.

Cannot increase voltage from a certain value.

•Check whether CC indicator appears. If so, increase the current limit.

7 General information

Terminology

DUT- Device Under Test

Warranty terms and conditions:

Warranty will apply only for the circuit but not for any other. Warranty will void if case was previously open or attempted to repair. Under any physical damages, damages caused by lightning or due to miss-use conditions, the warranty will not be applicable. The customer must fill the Warranty activation card and post it to IBBI Electronics to receive within 14 days of purchase or mail a scanned copy.

Customers are not encouraged to do any repair from out side even if the warranty expires.

IBBI Electronics 9