Voltmeter range
5 Device operation
5.1Setting output voltage
•Put VM/Vout switch [(10)] to Vout position
•Put C/V switch [(8)] to V position
•Volt LED indicator will light up [(4)]
•[(3)] will display “U” for Volt
•Adjust the voltage controller [(5)] to get the required value.
•The value will be displayed on [(2)] with one decimal place
Note: Make sure to keep reasonable current limiting value before setting output voltage so that current control (CC) will not take over.
5.2Setting current limit
•Press and hold
•Then display[(2)] will show the present current limit in Amperes.
•[(3)] will display “A” for Current
•Now rotate the current controller knob [(6)] while looking at the display. Stop when the desired value appears.
Note: The output voltage will be automatically be controlled if the external device tries to drag current more than the set limit.
5.3Viewing actual current flow
•Power up the DUT with
IBBI Electronics | 5 |
