Fisher 1000-(10003), 2000-(20364) owner manual Bearing and Set Screw Maintenance

MAINTENANCE

Bearing and Set Screw Maintenance

Disconnect the electrical plug between the spreader and the truck before performing any maintenance.

1.Tighten all set screws shown after every 60 hours of use.

2.Grease the top and bottom drive shaft bearings as shown. Due to the harsh environment of the bottom bearing it will require more care than the top bearing.

Top Bearing

Set Screw

Motor Pulley

Set Screw

Shaft Pulley

Set Screw

Bottom Bearing

Set Screw

Top Bearing: Grease after every 60 hours of use. Use a good quality multi-purpose grease.

Auger

Set Screw

Spinner

Set Screw

Bottom Bearing: Grease after every 8 hours of use. Use a good quality multi-purpose grease.

April 1, 2005 16 Lit. No. 94430/94431