Fisher 2000-(20364), 1000-(10003) owner manual Torque Chart, Safety Information

SAFETY INFORMATION

CAUTION

Disconnect electric power at spreader electrical wiring harness connection and tag out if required before servicing or performing maintenance.

CAUTION

Do not leave unused material in hopper. Material can freeze or solidify, causing unit to not work properly. Empty and clean hopper after each use.

NOTE: Maintain proper belt tension for correct belt functioning.

NOTE: Lubricate grease fittings after each use. Use a good quality multi-purpose grease.

NOTE: Airborne noise emission during use is below 70 dB(A) for the spreader operator.

Torque Chart

CAUTION

Read instructions before assembling. Fasteners should be finger tight until instructed to tighten according to the torque chart. Use standard methods and practices when attaching spreader, including proper personal protective safety equipment.

Recommended Fastener Torque

Chart (Ft.-Lb.)

Size	SAE	SAE	SAE
	Grade 2	Grade 5	Grade 8
1/4-20	6	9	13
5/16-18	11	18	28
3/8-16	19	31	46
3/8-24	24	46	68
7/16-14	30	50	75
1/2-13	45	75	115
9/16-12	66	110	165
5/8-11	93	150	225
3/4-10	150	250	370
7/8-9	150	378	591
1-8	220	583	893
	Metric Grade 8.8 (Ft.-Lb.)
Size	Torque	Size	Torque
M 6	7	M 12	60
M 8	17	M 14	95
M 10	35	M 16	155

These torque values apply to fasteners except those noted in the instruction.

Lit. No. 94430/94431 3 April 1, 2005