TABLE OF CONTENTS
PREFACE | 1 |
SAFETY INFORMATION | 2 |
Before You Begin | 2 |
Torque Chart | 3 |
LOADING | 6 |
Certification | 6 |
Approximate Material Weights | 6 |
MOUNTING THE SPREADER | 7 |
Fixed Mount Spreader | 7 |
SWING AWAY® Spreader | 8 |
Receiver Mount Spreader | 8 |
OPERATING THE SPREADER | 9 |
Driving and Spreading on Snow and Ice | 9 |
Accessory Circuit | 9 |
Spreader Control | 10 |
ON/OFF Control (Early Style) | 10 |
Starting and Stopping the Motor | 10 |
ON/OFF Control (Late Style) | 11 |
Starting the Motor | 11 |
Blast Position | 11 |
Stopping the Motor | 11 |
Variable Speed (PWM) Control | 12 |
Starting the Motor with Variable Speed (PWM) Control | 12 |
Stopping the Motor with Variable Speed (PWM) Control | 12 |
REMOVING THE SPREADER | 13 |
Removing the Fixed Mount Spreader | 13 |
Removing the Fixed Mount Brackets | 13 |
Removing the Receiver Mount Spreader | 13 |
Removing the SWING AWAY Spreader | 13 |
Removing the SWING AWAY Top Brackets | 13 |
Removing the SWING AWAY Base Plates | 13 |
MAINTENANCE | 14 |
Cleaning | 14 |
Preseason Check | 14 |
Postseason Maintenance | 14 |
Drive Belt Replacement | 15 |
Recycle | 15 |
Bearing and Set Screw Maintenance | 16 |
4 PIN HARNESS WIRING DIAGRAM | 17 |
2 PIN HARNESS WIRING DIAGRAM | 18 |
TROUBLESHOOTING | 19 |
ON/OFF Control | 19 |
Mechanical Problems - Variable Speed (PWM) and ON/OFF Control | 20 |
Early Production - 2 Pin Harness | 21 |
April 1, 2005 | ii | Lit. No. 94430/94431 |
