18
Using your cooktop
Gas burners
The knob (Fig. 14) controls the flow of gas through the safety valve.
O= closed valve
= | maximum flow |
|
|
|
| ||||||
= | minimum flow |
|
|
|
| ||||||
You can choose to cook at any heat between and | , but never between | and O. | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 14a Burner knob and symbols (CG604 models (no flame failure))
Fig. 14b Burner knob and symbols (CG604 models (with flame failure))
Fig. 14c Burner knob and symbols (CG905 models)
Using the burners
1Choose the control knob for the burner you want to use.
2Press the knob down gently and turn it anticlockwise to the position. The ignitors on all the burners will spark. Flame failure models only: Hold down the knob for approximately 10 seconds after the burner has lit. Releasing the knob too soon will extinguish the flame.
3Adjust the flame anywhere between the 
and
positions. Do not adjust the flame between
and O.
Note: If the burner does not light within 15 seconds, turn the control knob off and wait at least one minute before trying again.
4After use, always turn the knobs to the off (o) position. For models without the flame failure safety feature, you should also close the cock valve on the gas bottle or the main gas supply line.
