Installation instructions

IZONA CookSurface

CG903ML & CG903MLD models

NZ AU

Important!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed at the end of this document or contact your local Fisher & Paykel dealer.

1SAFETY AND WARNINGS

WARNING!

Electrical shock hazard

Disconnect appliance from main power supply before continuing.

Failure to do so could result in electrical shock or death.

WARNING!

Cut hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

Important safety precautions!

Particular attention shall be given to the relevant requirements regarding ventilation.

Please make this information available to the person installing the appliance as it could reduce your installation costs.

This appliance is to be installed and connected to the electricity and gas supply only by an authorised person.

Installation must comply with your local building and local gas authority codes and electricity regulations.

Failure to install the appliance correctly could invalidate any warranty or liability claims.

These appliances are registered in: (New Zealand) at www.ess.govt.nz and (Australia) with SAI Global at www.saiglobal.com.

This gas appliance is suitable for connection to natural gas only. If in doubt, refer to the local gas network operator or gas supplier to con￿rm gas type at installation site.

Before you install the appliance, please make sure that

the local distribution conditions (nature of gas and pressure) and the adjustment of the appliance are compatible. For adjustment conditions for this appliance, see ‘Gas rate summary’

a suitable disconnection switch is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. A means of disconnection with at least a 3 mm air gap contact separation in all poles must be incorporated into the ￿xed wiring in accordance with the wiring rules, unless the local wiring rules allow for alternative means

the appliance is connected to a 220V - 240V 50Hz (10 A) power supply only and earthed via the power supply cable

there is a power outlet within reach of the power supply cable (900 mm from the centre rear of the product). This must be accessible after installation. The power supply cable should not touch any metal parts

if the power supply cable is damaged, it is replaced only by the special cable: Part no. 531953 - Flex Terminal Block Assy NZ/AU, obtainable from authorised Fisher & Paykel Service Agents

the supply connection point (gas shut-o￿valve) is accessible after installation the benchtop is made of a heat resistant material

the installation complies with all the requirements of Australian and New Zealand Gas Installation Standards (AS5601, NZS5261), including that the product has to be installed so that the surface temperature of any nearby combustible surface will not exceed 65 OC above ambient. See 3 ‘Clearance Dimensions’.

When you install the appliance

We do not recommend you ￿ush mount or seal this appliance into the bench with silicone or glue. Doing so will make future servicing di￿cult. Fisher & Paykel will not be liable for any costs associated with removing or replacing a sealed-in appliance, nor for repairing any damage that may be incurred by doing this.

Seal exposed bare edges of the cutout with an oil-based paint or moisture-proof polyurethane to prevent possible moisture creeping between the cooktop trim and the benchtop.

We do not recommend the use of a down-draught extractor fan with the appliance, as it may distort the ￿ame pattern, causing uneven heating and reduced cooking performance.

Where this appliance is installed in marine craft or in caravans, it shall not be used as a space heater. No combustible material or products should be placed on this appliance at any time.

Do not spray aerosols in the vicinity of this appliance while it is in operation.

If, after following the instructions given, the appliance cannot be adjusted to perform correctly, please refer to the Service & Warranty book for warranty details and your nearest Authorised Service Centre, Customer Care, or contact us through our website: www.￿sherpaykel.com.

Page 1
Image 1
Fisher & Paykel CG903MLD installation instructions Installation instructions, Safety and Warnings

CG903ML, CG903MLD specifications

Fisher & Paykel is renowned for its commitment to quality and innovation in kitchen appliances, and the CG903MLD and CG903ML gas cooktops are no exception. These models exemplify modern design and advanced cooking technology, making them ideal choices for both professional chefs and home cooking enthusiasts.

The Fisher & Paykel CG903MLD and CG903ML are both 90cm gas cooktops, boasting a spacious cooking surface that allows for multiple pots and pans to be used simultaneously. One of the standout features is the high-powered and efficient dual-flame burners, which provide precise control over heat levels. This feature is especially advantageous for tasks like simmering sauces or bringing water to a boil quickly.

Another remarkable aspect of these cooktops is their ergonomic design, allowing for easy access and use. The durable stainless steel surface not only ensures long-lasting performance but also makes cleaning a breeze, as it is resistant to stains and scratches. Additionally, the cooktops come with well-designed, heavy-duty cast iron grates that provide a stable and secure base for cookware of all shapes and sizes.

In terms of technology, both models feature a flame failure safety device, which automatically shuts off the gas supply if a flame is extinguished. This crucial safety feature provides peace of mind to users, particularly in busy kitchens. The cooktops also include an easy-to-use ignition system; with a simple twist of the knobs, users can ignite the burners quickly and effortlessly.

The CG903MLD variant is equipped with a unique wok burner, allowing for high heat cooking that is perfect for Asian cuisine. This feature not only elevates the cooking experience but also expands culinary possibilities for users who enjoy experimenting with different cooking styles.

Both cooktops are designed to integrate seamlessly with other Fisher & Paykel appliances, creating a cohesive and stylish kitchen environment. With their blend of performance, safety, and aesthetics, the CG903MLD and CG903ML gas cooktops represent an excellent investment for anyone looking to enhance their cooking capabilities. Whether you are a novice home cook or a seasoned chef, these cooktops provide the versatility and reliability needed to create exceptional culinary delights.