![7 REMOVE FROM PACKAGING](/images/new-backgrounds/67793/677939x1.webp)
7 REMOVE FROM PACKAGING | 8 ENSURE THERE IS ADEQUATE AIR SUPPLY | |||
|
|
|
| |
A | ||||
| A |
500 mm
50 mm
The CookSurface requires adequate air supply to fully function. The base of the CookSurface must have direct unrestricted ventilation to the room where the CookSurface is installed. Do not ventilate the base area to an external area that can be at dierent air pressure to that of the burners. You may ventilate from adjacent cupboards, but ensure that the available air supply will not be restricted. The ventilation area must be
500 x 50 mm or of an equivalent area. If the 50 mm wide slot is not possible due to the width of the available toe recess, increase the length of the slot so as to maintain an equivalent area of 250 cm2. An air intake grill is provided. Ensure that the grill is not covered or obstructed.
9FIT THE ELBOW & FLEXIBLE HOSE
10LOWER GENTLY INTO THE CUTOUT
| Important! |
A | |
|
The exible hose supplied
must be used to enable servicing.
1 | ” NPT |
PTFE![9FIT THE ELBOW & FLEXIBLE HOSE](/images/new-backgrounds/67793/677939xi3.webp)
![10LOWER GENTLY INTO THE CUTOUT](/images/new-backgrounds/67793/677939xi4.webp)
![” NPT](/images/new-backgrounds/67793/677939xi5.webp)
![PTFE 2](/images/new-backgrounds/67793/677939xi6.webp)
![Manual background](/images/new-backgrounds/67793/677939xi7.webp)
2
A
1
Ensure there is enough exible hose looped to allow for removing appliance for servicing.
2
1