EN
18
Making coffee using coffee beans
1The appliance is preset to make coffee with a normal taste. You can also choose coffee with an extramild, mild, strong or
To choose the required taste, press the 
icon (B4) (fig. 7). The required coffee taste is displayed.
2Place 1 cup under the spouts to make 1 coffee (fig. 8) or 2 cups for 2 coffees (fig. 9). Lower the spouts as near as possible to the cup for a creamier coffee (fig. 10).
3Press the 
icon (B5) (fig. 11) to select the type of coffee: espresso, small cup, medium cup,
large cup, mug. Now press the 
icon (B10) (fig. 12) if you want to make a coffee and the 
icon (B11) (fig. 13) if you want to make 2 coffees. The appliance now grinds the beans and starts delivering the coffee into the cup.
Once the set amount of coffee has been delivered, the machine stops delivery automatically and expels the exhausted waste coffee into the waste coffee container.
4After a few seconds, the appliance is ready for use again.
5To turn the appliance off, press the
appliance performs an automatic rinse cycle. Take care to avoid scalds).
If the coffee is delivered a drop at a time or not at all, see the “Adjusting the coffee mill” section. If the coffee is delivered too fast and the cream is not satisfactory, see the “Adjusting the coffee mill” section.
Tips for a hotter coffee
Proceed as described in the section “Changing and setting menu parameters”, “Rinse” function. Unless preheated, do not use excessively thick cups as they will absorb too much heat. Preheat the cups by rinsing them with hot water.
Coffee delivery can be interrupted at any moment by
As soon as delivery is finished, to increase the quantity of coffee in the cup, just keep pressing the previously selected icon within 3 seconds after delivery has finished.
When the appliance displays “FILL TANK”, fill the tank with water or the appliance will not deliver coffee. (It is normal for there to be a little water left in the tank).
After about 14 single (or 7 double) coffees, the appliance displays
“EMPTY WASTE COFFEE CONTAINER”.
To clean, open the service door on the front of the appliance by pulling the spout (fig. 16), extract the drip tray (fig. 17) and clean.
When cleaning, always extract the drip tray completely.
Important!
When extracting the drip tray, the waste coffee container MUST always be emptied.
If this is not done, the machine may be clogged.
