Fisher & Paykel EB60DSXB Displayed messages, Alternating with, During delivery, Then Fill Tank

EN

30

Displayed messages

Displayed message	Possible causes		What to do
FILL TANK	The water tank is empty or		Fill the tank with water and/or
	positioned incorrectly.		insert it correctly, pushing it as
			far as it will go.
GROUND TOO FINE		The grinding is too fine and		Turn the grinding
ADJUST MILL AND		the coffee is delivered too		adjustment knob one click
(alternating with)
		slowly.		clockwise towards “7”.
PRESS OK
		The machine cannot make		Make sure the filter (A26) is
		coffee as there is air in the		propertly installed and that
		hydraulic circuit. Possible		the installation has been
		cause: the filter has not been		carried out correctly.
		installed correctly.

GROUND TOO FINE	The tank has been removed
ADJUST MILL AND	during delivery.
(alternating with)
PRESS OK
(then) FILL TANK

Insert the tank and press the OK icon (B9). “HOT WATER PRESS OK” is displayed.

EMPTY WASTE COFFEE The waste coffee container (A4) is

CONTAINERtoo full or more than 3 days have passed since you last made coffee (this guarantees correct hygiene of the machine).

Empty the waste coffee container and clean, then replace.

Important!

When removing the drip tray, the waste coffee container MUST be emptied, even if

it is not completely full. If this is not done, when you make the next coffees, the waste coffee container may fill up more than expected and clog the machine.

INSERT WASTE COFFEE	After cleaning, the waste coffee		Open the service door and
CONTAINER	container has not been replaced.		insert the waste coffee
			container.
ADD PRE-GROUND		The “pre-ground coffee”		Extract the appliance and
COFFEE		function has been selected		place pre-ground coffee in
		without placing any pre-		the funnel.
		ground coffee in the funnel.		Empty the funnel with the
		The funnel (A21) is blocked.		help of a knife as described
				in the section “Cleaning the
				pre-ground coffee funnel”.