Fisher & Paykel Ecosmart manual Auto Water Fill Level Auto Water Level Adjustment, Light on

16CHANGING PRE-SET OPTIONS

OUT OF BALANCE RECOVERY ROUTINE

OUT OF BALANCE RECOVERY OPTIONS

REGULAR

light on = automatic recovery

REGULAR

light off = machine stops

AUTO WATER FILL

LEVEL

AUTO WATER LEVEL ADJUSTMENT

Light on
FAVORITE	=	less water
PERM. PRESS	=	less water
WOOL	=	less water
DELICATE	=	less water
HEAVY DUTY =		factory
		setting

When your Ecosmart is spinning it can sense if the wash load is out of balance and will stop and re-try spinning up to 3 times. If the machine still senses an unbalanced load there are two options the machine offers.

•Automatic Recovery Option:

Your Ecosmart will try to automatically correct the out of balance load. It will fill with water and agitate to redistribute the load before trying to spin up again.

•Machine Stops Option:

Your Ecosmart will stop, giving a short burst of beeps every five seconds and the RINSE or SPIN light will flash.You must redistribute the load more evenly yourself. (Use this option if you wish to conserve water.)

1.Enter the Option Adjustment Mode.

2.Use the REGULAR button to select the Out of Balance Recovery Option you prefer.

3.Press Power to store your selection.

If you are not satisfied with the level that your Ecosmart fills to on AUTO WATER LEVEL, you can alter the fill level that Auto will select.

If you feel there is too much water, you can decrease the fill level that will be selected.

1.Enter the Option Adjustment Mode.

2.Use the CYCLE buttons to decrease the amount of water selected.

3.Press POWER to store your selection.

If you feel that there is not enough water for the load, we recommend that you check by pausing the machine and pushing the clothes down to see how much spare water is at the bottom of the wash basket. Clothes often float and your Ecosmart can sense the water under the clothes. Failing this, you might like to select a higher water level manually.