Fisher & Paykel NZ AU Installation Auto-timer 3.5 kg dryer, Dryer position, Specifications

8

Installation – Auto-timer 3.5 kg dryer

Dryer position

The Auto-timer 3.5 kg dryer is front venting. The air is taken in through the grill at the rear of the dryer and vented out through the grill in the door.

The dryer should be positioned so that the air intake at the rear is unrestricted. The minimum clearance needed from the wall is 50 mm.

Included with this dryer are two plastic spacers. Fitting these on the rear of the dryer will ensure the dryer is correctly positioned away from the wall.

Use screws provided to fit the spacers. (As shown in the diagram.)

Directional outlet grill

The outlet grill can be rotated to direct the exhaust air. It should be adjusted so that it points towards an external window or door.

Specifications

Electronic and

Auto-timer dryers

Fig. 10 Spacers

Fig. 11 Directional outlet grill

Auto-timer dryer

Capacity (Dry)	4.5 kg (Dry)	3.5 kg (Dry)
Dimensions
Width	565 mm	565 mm
Depth	560 mm	440 mm
Height	810 mm	810 mm
Electrical	NZ/AUS	NZ/AUS
Volts	230/240	230/240
Hz	50	50
Amps	8.0	8.0

Note: if the electrical supply cord is damaged it must be replaced by the manufacturer or its service agent or similar qualified person in order to avoid a hazard.