Installation – Electronic and Auto-timer 4.5 kg dryers

7

Flush venting

The dryer is vented through a hole in the wall, using a galvanised metal pipe or flexible hose. This is suitable for floor and wall mounted dryers installed against an outside wall.

Flexible Hose 400 mm

Part No. 460754

Fig. 6 Flush venting

Movable venting

The dryer is vented using a flexible hose through a hole in the wall. This allows the dryer to be moved from the wall slightly. Suitable for floor mounted dryers only.

Flexible Hose 2 m Part No. 503858

Window venting

A flexible hose is used to vent the dryer through a window. Maximum hose length is 2 metres.

Flexible Hose 2 m

Part No. 503858

Venting duct

The dryer is vented using an extendible duct that allows venting to a window or through an existing wall vent. The duct can be used with a flexible hose. Specially suitable for

inverted dryers.

 

Venting Duct Kit

Part No. 460886

Flexible Hose 2 m

Part No. 503858

Internal venting

Included with the dryer is a vent deflector. This screws on to the back of the dryer over the exhaust outlet. If external venting is not possible the deflector must be fitted. The outlet of the vent deflector must be clear of any obstructions to ensure normal and safe operation.

Fig. 7 Movable venting

Fig. 8 Venting duct

Fig. 9 Internal venting

Page 9
Image 9
Fisher & Paykel NZ AU Flush venting, Movable venting, Window venting, Venting duct, Internal venting