10Dryer wall mounting instructions
20 | 104 |
66 |
|
66 | 0 100 WALL VENT HOLE |
|
Fit inverted control panel over the existing panel if necessary
519 | mm |
|
Fit spacers as shown
Floor
Ensure bracket is securely fastened at both ends (eg. into the stud). Fit timber slats if necessary.
Ceiling 70 mm
Bracket holes
For the average person the recommended height for the bracket is
2070 mm from the floor
Fig. 12 Wall mounting instructions
Note: if you change mounting from upright to inverted or vice versa the dryer must be cleaned internally by a serviceman.
