Care and cleaning
37
Using the pyrolytic self-clean function
Important!
Do not use oven cleaners, any degreasing cleaners, or oven liners.
Do not clean the door or cavity seals, or use any oven cleaning products on the seals. Do not use your oven to clean miscellaneous parts.
Make sure the room is well ventilated.
Move any caged birds to another closed and
If there are cracks or flaws on the oven door glass (inside or outside), if the seals are ruined or worn, or if the door does not close properly, uplug the oven and contact your Authorised Service Centre.
Note: use this function only when the oven needs cleaning. Do not wait until it is very dirty.
PYROLYTIC MODELS
1Remove the oven shelves and all other cookware/utensils.
2Wipe up large food spills. Failure to do so may discolour the enamel.
3 Close the oven door.
4 Turn the function knob to . PO.OO appears with the letter P flashing.
5 Press button 3. P1.30 (pyrolytic
I I I I
I
I
I
I
I
I
I
I
Note: you can adjust the | 1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
|
|
| |
hour 30 minutes and three hours, depending on how dirty |
|
|
|
|
|
|
the oven is. To do this, press button 2 and then button 5 or 6. | Figure 32 |
The
When the oven has finished cleaning, PO.OO will appear with AUTO flashing.
PO.OO will remain until the oven temperature drops below 300 oC. Then AUTO and the letter P will flash and the door locked and temperature indicator lights will go out.
6Turn the function knob to O. The time will appear.
7 Wait for the oven to cool down completely.
8 Remove the grey ash with a small brush or damp cloth, then wipe out the oven with a clean damp cloth, and dry with a clean
Important!
Wait for the oven to cool down completely before using it again.
To stop the