Manuals / Fisher & Paykel / Kitchen Appliance / Oven

Fisher & Paykel OB60 Care and cleaning, Replacing the oven lamp, Electronic Models, Left lamp

Models: OB60

1 48

Download 48 pages 56.29 Kb

Page 31

Replacing the oven lamp

Care and cleaning 29

Replacing the oven lamp

Let the oven cavity and the heating elements cool down.

Left lamp:

Remove the side rack (and the side catalytic liner if supplied) by unscrewing the fixing screws. Press down from the top the protective cover A (Fig. 26) and remove it by rotating on the lower side.

Important!

Never use screwdrivers or other utensils to remove the cover A. This could damage the enamel of the oven or the lampholder. Only use your hands.

Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C) with the specifications: 230-240V 50 Hz, 25W, E14.

Refit the protective cover A operating in reverse order. ATTENTION: the notch in the inner edge of the cover must be oriented toward the lamp.

Replace the side rack (and the side catalytic liner if supplied).

Top right lamp:

Remove the protective cover C (Fig. 26).

Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C) with the specifications: 230-240V 50 Hz, 25W, E14

Refit the protective cover.

Note: Oven bulb replacement is not covered by your warranty.

1

A

2	B	A	B	C

A

ELECTRONIC MODELS

Fig.26 Removing the oven lamps

Image 31

Fisher & Paykel OB60 Care and cleaning, Replacing the oven lamp, Electronic Models, Left lamp, Top right lamp

Contents

Built-in oven Installation instructions and User guideNZ AU GB IE Page SAVE THESE INSTRUCTIONS ContentsElectrical Shock Hazard Safety and warningsImportant safety precautions InstallationThe oven will rest on a surface that can support its weight Safety and warningsThe oven door can open fully without obstruction Do not use a steam cleaner to clean any part of the oven Safety and warningsImportant safety precautions Take care when opening the oven doorH FL G Installation instructions16-20 mm 2.5 mm Please take extra care not to damage the lower trim of the oven Air circulation230- 240 Replacing the power supply cableElectronic 230-240 V~ 3600-3830W Pyrolytic 230-240 V~ 3095-3370W Feeder cable section type HO5RR-FTL TL LF1 LF2 VRVT TE GE BE CE 8 Wiring diagramFigure 7 Electronic oven wiring diagram Electronic modelsPyrolytic oven NZ AU models Wiring diagramFigure 8a Pyrolytic oven wiring diagram Figure 8b Pyrolytic oven wiring diagramPage ELECTRONIC MODELS Using your oven for the first timeSYMBOL 12 Using the control buttonsSYMBOL SYMBOLTurning the oven on and off Using the control buttonsSetting the clock Using the timerELECTRONIC MODELS 14 Selecting the cooking functionsWhen the symbol is lit only the oven lamp When the symbol is lit only setting settingWhen the symbol is permanently lit the oven is at the set temperature Selecting the temperature“ o “ CelsiusCelsius degreesdegreessymbolsymbol When the symbol is flashing the oven is preheatingBAKE 16 Cooking functionsELECTRONIC MODELS OVEN LAMPDEFROST/WARM Cooking functionsELECTRONIC MODELS FAN BAKEELECTRONIC MODELS 18 Manual and automatic cookingUsing the oven manually Using the oven automaticallyELECTRONIC MODELS Error codesError codes “----” Message on both clock and temperature displaysBefore you start cleaning your oven, please 20 Care and cleaningGeneral advice Cleaning the outside of the ovenWhen you replace the panels, make sure that Care and cleaningCleaning the inside of your oven Cleaning the enamel cavityCleaning the fat filter 22 Care and cleaningELECTRONIC MODELS ELECTRONIC MODELS Care and cleaningWhen fitting the sliding shelf supports, make sure that you fit Sliding shelf supports some models onlyMODELS 24 Care and cleaningCleaning the oven door glass Removing the inner and middle panes of glassFig.22b Care and cleaningELECTRONIC MODELS Fig.22aReplacing the middle and inner panes of glass 26 Care and cleaningELECTRONIC MODELS MODELS Care and cleaningELECTRONIC Removing the oven door 28 Care and cleaningELECTRONIC MODELS Left lamp Care and cleaningReplacing the oven lamp ELECTRONIC MODELSPYROLYTIC MODELS 30 Using your oven for the first timePYROLYTIC MODELS Clock and timerSetting the clock Using the timerPYROLYTIC MODELS 32 Selecting the functions and temperatureSelecting the temperature Selecting the functionsOVEN LAMP PYROLYTIC SELF-CLEANCooking functions PYROLYTIC MODELS2 Display OFF Cooking troubleshootingCooking functions PYROLYTIC MODELSPYROLYTIC MODELS Automatic cookingCleaning the oven door glass 36 Care and cleaningGeneral advice Cleaning the outside of the ovenWait for the oven to cool down completely before using it again Care and cleaningUsing the pyrolytic self-clean function Do not use oven cleaners, any degreasing cleaners, or oven linersPYROLYTIC MODELS Care and cleaningPyrolytic self-clean troubleshooting 3 The self-clean cycle has been cancelled by a power cut6 F0.00 with AUTO flashing Care and cleaningPYROLYTIC MODELS 5 ‘door’ with AUTO flashingRemoving the oven door 40 Care and cleaningMODELS Fig.34 Care and cleaningReplacing the oven lamp PYROLYTIC MODELSBefore you call for service or assistance Warranty and servicePage Page Page NZ AU GB IE Built-in oven user guide Published 02/2007 Copyright Fisher & Paykel 2007. All rights reservedPart No. 599352 A