US CA
6 | Installation |
Specifications | |
| DIMENSIONS (FRONT VIEW) |
| |
|
Fig. 02
DIMENSIONS (SIDE VIEW) |
|
| |
POWER | |
CORD | |
1/2" |
|
| |
1/4" |
|
Fig. 03
Base Cabinet Installation
The cabinet depth from the outer edge of the face frame to the inside back of the cabinet or wall should be at least 24” (see Fig. 04).
The Warming Drawer should be installed into a base cabinet with minimum outside dimensions of
Power supply required: 120Volts AC; 5 Amp min., 15 Amp maximum circuit requirement.
CUT OUT DIMENSIONS
20"
10 +– 1/16"
A 120 volt AC GFI outlet should be located below the Warming Drawer
2x4's or similar support
>– 24"
Fig. 04