2
CONVERSION TO LP/PROPANE GAS (OR CONVERSION BACK TO THE ORIGINAL GAS - NATURAL GAS)
Every range is provided with a set of orifices for the various types of gas. Select the orifices to be replaced according to the “ORIFICES TABLE”.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each orifice.
CAUTION: Save the orifices removed from the appliance for future use.
SETTING THE PRESSURE REGULATOR
The pressure regulator is accessible by removing the warmer drawer; the pressure regulator is positioned on the rear right side of the range (fig. 2.9).
To remove the warming drawer:
1.Open the drawer completely (fig. 2.6)
2.Move down the lever of left guide (fig. 2.7) and up the lever of right guide (fig. 2.8).
3.Remove the drawer holding the levers in the same position (fig. 2.6).
2
Fig. 2.8
3 2 
Fig. 2.6
Fig. 2.7
16
