Fisher & Paykel RF24T How To Install Your Outdoor Beer Dispenser Components, Contents of Kit

INSTALLATION

HOW TO INSTALL YOUR OUTDOOR BEER DISPENSER COMPONENTS

Contents of Kit:

Draft Tower Assembly

Keg Coupler

Air Line with Clamps

Single Gauge Regulator

5 lb. CO2 Empty Cylinder

Tools needed:

Crescent Wrench

Pliers

Screwdriver

Q. WHAT SIZE KEG WILL FIT INTO MY REFRIGERATOR?

Approximate measurements required to tap most kegs:

	Quarter Barrel	Half Barrel
Height	17-21 inches	25-29 inches
Diameter	16-20 inches	18-22 inches
Weight	80-85 pounds	160-180 pounds

Check with your local beer wholesaler or retailer to verify actual keg sizes, including tap heights.

Q. CAN MY REFRIGERATOR MAINTAIN TEMPERATURES BETWEEN 34º-38º F?

Draft beer is not pasteurized, so it must be kept cold, preferably 38º. Temperature above 38º may cause the beer to become wild, turn sour and cloudy.

Draft beer should be consumed within 30-45 days. It is not pasteurized, and will lose its original brewery fresh taste and aroma the older it gets.

Q. HOW MUCH BEER WILL I CONSUME IN A 30 DAY PERIOD?

There are two keg sizes: the quarter barrel containing 7-3/4 gallons or approximately 3-1/2 cases of 12 ounce bottles or cans; the half barrel containing 15-1/2 gallons or approximately 7 cases.

8