Fisher & Paykel RF51RCWX1 Cleaning and maintenance, Replacing the light bulb

Cleaning and maintenance

Replacing the light bulb

11

1To avoid electric shock, unplug your Wine Chiller before replacing the bulb.

2Remove the light cover as illustrated (Fig. 7).

3Unscrew the bulb and replace.

Bulb specification: 220-240V,15W,E14

4Refit light cover.

1

Light Cover 2

Fig 7. Removing the light cover

Normal operating sounds you may hear

ƒƒ Running/boiling water, gurgling sounds or slight vibrations are the result of the refrigerant circulating through the cooling coils.

ƒƒ The thermostat control will click when it cycles on and off. ƒƒ Other sounds may be heard for the following reasons:

–Cabinet not level.

–Floor uneven or weak.

Transporting your Wine Chiller

ƒƒ Always move the Wine Chiller vertically. Do not transport the product lying down as possible damage to the sealed system could occur.

Note:

After moving, wait for 30 minutes before plugging in the Wine Chiller.