SU4H/UF2 (FVH-T619 GB) Tue. Mar. 09/1999

ALTERNATIVE CABLE TV CONNECTIONSCable converter/decoder output channel setup

1Be sure the cable connections are correct. (See page 12.)

2Turn on the TV, VCR and cable converter/decoder.

3Set the TV to channel 3 or 4.

4Press the VCR button on the remote control to select the VCR operation mode.

5If the VCR indicator is off, press the TV/VCR button on the remote control.

The VCR indicator lights.

NOTE: If the initial setup has not yet been

completed, the “Auto Setup” message will appear. In that case, first follow steps 5 – 7 under “INITIAL SETUP” on page 15.

6Press the MENU button on the remote control. The main MENU appears.

@@@@@@@@@MENU

Timer@program

VCR@setup

Clock@set

Language@select

Rec.List@super

Auto@tuning@memory

[CH§‡]†Select

[SET]†OK@@@@@@[MENU]†TV

7Press the CH/TRACK l (or j) button to select the VCR setup option, then press the SET button.

The VCR setup menu appears.

CATV/TV@@@@@@@…CATV@TV

Cable@box@@@@@…No@@@Ch02

MTS@@@@@@@@@…ST@SAP@Mono

Audio@out@@@…ST@L@R@Mono

Child@Lock@@@@@On@@…Off

Off@timer@@@…Off@2Hr@6Hr

Auto@AV@Select@On@@…Off

[CH§‡]†Option

[SET]†Select@@[MENU]†TV

8Press the CH/TRACK l (or j) button to select the Cable box option.

9Press the SET button to set your cable converter/decoder output channel. The output channel should be indicated on the cable converter/decoder back panel. If not, please refer to the cable converter/decoder instruction manual for details.

Press the SET button repeatedly. Each time you press the button, the selection changes:

No → Ch02 → Ch03 ... Ch07.

The selection is indicated by the “z” next to it.

NOTE: Select “No” if you are not using the cable box.

FWhen finished, press the MENU button to exit the menu display.

IMPORTANT NOTES:

When the cable converter/decoder output channel is selected as described above,

œThe VCR tuner remains set to receive the same channel as the output channel of the cable converter/decoder. Auto channel programming and manual channel selection using the VCR tuner are not possible.

œIf you turn on the cable converter/decoder after turning on the VCR, no image will appear on the TV screen. In this case, turn off the VCR, then turn it on again.

œLeave the cable converter/decoder on until timer recording is complete.

œFor timer recordings, you must select the channel to be recorded using the channel selector on the cable converter/decoder.

13