SU4H/UF2
Before starting
œTurn on the power (TV and VCR).
œSet the TV to channel 3 or 4.
œPress the VCR button on the remote control to select the VCR operation mode.
œIf the VCR indicator is off, press the TV/VCR button on the remote control.
The VCR indicator lights.
1Press the MENU button on the remote control. The main MENU appears.
2Press the CH/TRACK l (or j) button to select the VCR setup option, then press the SET button.
The VCR setup menu appears.
CATV/TV@@@@@@@…CATV@TV
Cable@box@@@@@…No@@@Ch02
MTS@@@@@@@@@…ST@SAP@Mono
Audio@out@@@…ST@L@R@Mono
Child@Lock@@@@@On@@…Off
Off@timer@@@…Off@2Hr@6Hr
Auto@AV@Select@On@@…Off
[CH§‡]†Option
[SET]†Select@@[MENU]†TV
3Press the CH/TRACK l (or j) button to highlight the desired option.
4Press the SET button once or more to move the “z” indicator in front of your selection.
5When finished, press the MENU button to save the settings.
Reference pages are shown in square brackets.
CATV/TV [22]œIndicate whether you subscribe to cable TV or use antenna.
Cable box [13, step 9]œIf you use a cable converter/decoder (cable box), set the output channel.
MTS [28]œSelect the MTS (Multichannel TV Sound) mode - stereo, SAP or mono.
Audio out [29]œSelect the audio output mode.
Child Lock [38]œSelect this to block picture and sound.
Off timerœSelect this to set the VCR to automatically shut off after a specified period of
Off: The power will not be turned off automatically.
2Hr: The power is turned off after 2 hours.
6Hr: The power is turned off after 6 hours.
NOTE: The Off timer begins counting down after the last VCR activity. Approximately 5 minutes before the power is turned off, the “Your VCR will be off shortly” message is displayed.
Auto AV Select [5]œTurn on and off the A/V output on the rear panel when the VCR power is off.
On: The input signal at the front A/V input jacks is sent to the rear A/V output jacks.
Off: No output signal when the VCR power is off.
OPERATION BASIC
19