SU4H/UF2 (FVH-T619 GB) Tue. Mar. 09/1999

AUDIO OUTPUT MODE

Use the VCR setup menu to select the desired audio output mode when playing a tape or viewing a television broadcast.

NOTE: Audio output mode selection is not required when playing back a tape recorded in mono or viewing a mono TV program.

1Follow the “Before starting”steps on page 19.

2Press the MENU button. The main MENU appears.

3Press the CH/TRACK l (or j) button to select the VCR setup option, then press the SET button.

The VCR setup menu appears.

CATV/TV@@@@@@@…CATV@TV

Cable@box@@@@@…No@@@Ch02

MTS@@@@@@@@@…ST@SAP@Mono

Audio@out@@@…ST@L@R@Mono

Child@Lock@@@@@On@@…Off

Off@timer@@@…Off@2Hr@6Hr

Auto@AV@Select@On@@…Off

[CH§‡]†Option

[SET]†Select@@[MENU]†TV

4Press the CH/TRACK l (or j) button to select the Audio out option, then press the SET button to select the desired mode, as indicated by the “z”.

ST (STEREO): The left channel sound is heard from the left speaker and the right channel sound is heard from the right speaker.

Use this setting to listen to a stereo program or tape in stereo.

L:Left channel sound is heard from both speakers. Use this setting to listen to the left channel of a stereo program or the main audio of a program that contains an SAP soundtrack.

R:Right channel sound is heard from both speakers. Use this setting to listen to the right channel of a stereo program or the SAP soundtrack (if available).

Mono: The sound from the normal audio track (mono or second audio) is heard from both speakers.

5When finished, press the MENU button to exit the menu.

29