SU4H/UF2 (FVH-T619 GB) Tue. Mar. 09/1999

MULTIBRAND UNIVERSAL REMOTE CONTROL
Battery Installation and Operation

1Install the two supplied AA batteries as shown.

2Aim the remote control at the VCR and press the desired buttons to operate.

Setting the remote control code

The multibrand universal remote control can operate the basic functions of TVs and cable (CATV) converters/decoders made by the manufacturers listed below.

To enter the remote control code for your brand of TV or cable converter/decoder, follow the steps below.

For TV operation

1In the chart below, find the code corresponding to your brand of TV.

2While holding down the TV button, enter the 2-digit code using the number buttons (0 – 9).

The remote control is now set to operate your TV.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF IN A SAFE MANNER IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.Using the remote control

1Before using the remote control, press the VCR, TV or CATV/DSS button to select the device to be operated.

2To switch the remote control mode (to operate a different device), be sure to press the VCR, TV or CATV/DSS button first.

NOTES:

œThe remote control will not operate properly if something comes between the VCR and the remote control.

œThe POWER, 0 – 9, 100/ENTER, INPUT and CH/TRACK l and jbuttons are used to operate the VCR, TV, cable box and DSS receiver.

œVOL buttons operate TV volume regardless of the remote control mode selected.

TV brandsCode

ADMIRAL

05, 10, 13

EMERSON

17

FISHER

03

GE

07

GOLDSTAR

01

HITACHI

02

JVC

15

MAGNAVOX

08

MATSUSHITA

12, 18

MITSUBISHI

14

PANASONIC

12, 18

QUASAR

12, 18

RCA

06

SAMSUNG

16

SANYO

03

SHARP

00, 13

SONY

11

TECHNOL ACE

05

TOSHIBA

04

ZENITH

09, 10

 

 

NOTE: There may be some older TV models that cannot be operated with this remote control. If this is the case, use the original remote control supplied with the TV.

9