BASIC OPERATIONS

TURNING ON / OFF THE PROJECTOR

TURNING ON THE PROJECTOR

1

Complete the peripheral connections (with Computer, VCR,

and etc.) before turning on the projector. (Refer to

 

"CONNECTING TO THE PROJECTOR" on Pages 10~13 for

 

connecting the equipment.

2

Connect the projector's AC power cord into a wall outlet. The

LAMP indicator lights RED, and the READY indicator lights

 

GREEN.

3

Press the power ON-OFF button on the Remote Control Unit or

on the Top Control to ON. The LAMP POWER indicator dims,

and the Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts. The signal from the source appears after 30 seconds.

30

The Preparation Display disappears after 30 seconds.

TURNING OFF THE PROJECTOR

1

Press the power ON-OFF button on the Remote Control Unit or

 

 

 

 

 

 

 

 

on the Top Control, and the message "Power off?" appears on

 

Power off?

 

 

2

the screen.

 

 

 

 

 

 

 

 

Press again the power ON-OFF button to turn off the projector.

 

 

 

 

The LAMP indicator lights bright and the READY indicator turns

 

 

 

 

 

off. The Cooling Fans operate for 90 seconds after the

 

 

 

 

 

projector is turned off. (During this "Cooling Down" period, this

 

 

 

 

 

appliance cannot be turned on.)

 

 

 

 

3

The message disappears after 4 seconds.

When cooling the projector has finished, the READY indicator

 

 

 

 

turns to green again and you can turn the projector on. After

 

 

 

 

cooling down completely, disconnect the AC power cord.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:

1.Disconnect the AC power cord from the AC outlet.

2.Check the air filters for dust accumulation.

3.Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 42.)

4.Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call your authorized dealer or service station.

NOTE: The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is working, TEMPERATURE WARNING INDICATOR flashes red.

20