MCI MODE

WRITE DATA INTO THE MEMORY CARD

The data edited by Media Card Imager in the computer can be written in or read from the memory card with the PC Card drive of your Personal Computer or the PC CARD Slot of this projector.

The data edited by Media Card Imager is written in Bit Map type (BMP) or JPEG type (JPG).

ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR

If your computer doesn't have the PC card writing equipment, the data can be written or read by connecting with this projector.

NOTE : This operation can be made only by Media Card Imager in the Personal Computer.

Connect the projector to the Personal Computer with the Control Cable for Serial Port (optionally supplied / refer to page 12, 13).

1

Connect the projector to your computer with the Control Cable

 

for Serial Port (optionally supplied). (Refer to “CONNECTING

 

 

COMPUTER” on Page 12, 13.)

 

 

Insert the memory card into PC CARD SLOT of the projector.

 

 

And then, turn on the projector first and the computer.

 

2

 

 

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select View and press the SELECT button. Another dialog box VIEW SETTING Menu will appear.

3

Press POINT DOWN button and a red arrow appear. Move the

arrow to Card access by pressing POINT UP/DOWN button.

And then press SELECT button. “Ready to access” is displayed.

Operate Media Card Imager of your computer to write/read the data in the PC card. (Refer to Owner's Manual of Media Card Imager for operation.)

Move the arrow to each operation and press the SELECT button.

NOTE : Connect the projector to the computer with Control Cable before turning those appliances on.

Do not press any button while read/write the data through PC CARD Slot of the projector. Those operations are canceled and the data in the memory card may be damaged.

35