COMPUTER MODE

SELECTING COMPUTER MODE

DIRECT OPERATION

Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit.

MENU OPERATION

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button.

CURRENT MODE DISPLAY

MODE button

COMPUTER

MCI

VIDEO

COMPUTER / MCI

button

COMPUTER

MCI

When selecting the Computer Mode, the Current Mode display appears. It shows the information of the computer of the mode selected.

Providing the information of the computer detected by the projector.

SELECTING COMPUTER SYSTEM

AUTOMATIC MULTISCANNING SYSTEM

This projector automatically tunes to most different types of computer based on VGA, SVGA or XGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 26). When selecting Computer, this projector automatically tunes to the incoming signal and projects the proper image without any special setting. (Setting of the Computer System may be required when connecting some computers.)

Note : The projector may provides the messages below.

Go to PC adj.

The projector cannot discriminate or detect the

 

input signal from the computer. Adjust and set the

 

 

computer system manually. (Refer to page 24.)

 

There is no signal input from the computer. Make

No signal

 

sure the connection of the computer and the

 

 

projector is set correctly.

(Refer to

 

TROUBLESHOOTING on page 44.)

 

SELECT COMPUTER SYSTEM MANUALLY

To set the Computer system manually, select the mode on the ON-

SCREEN MENU.

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

 

SYSTEM and press the SELECT button. Another dialog box

 

COMPUTER MODE Menu will appear.

2

 

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the system that you want to set,

and then press SELECT button.

SYSTEM BOX

It displays the SYSTEM being selected.

The system being selected.

The systems on this dialog box can be selected.

Close the SYSTEM Menu.

23