Fisher PLC-SU22N Media Card Imager, SELECTING MCI MODE, AVAILABLE DATA, AVAILABLE CARD, MENU OPERATION, DIRECT OPERATION

AVAILABLE DATA

This projector can project the image data as follow through PC CARD SLOT.

●The data edited by “Media Card Imager.”

●The data of the resolution between VGA (640 X 480) and XGA (1024 X 768) in Bit Map type (BMP) or JPEG type (JPG), such as Digital Camera data, can be also displayed.

(Some image data in XGA size may not be displayed properly. In that case, reset the resolution to the lower.)

Refer to “SHOW THE DATA IN THE MEMORY CARD” on page 34 to display the image data.

Media Card Imager

Media Card Imager (CD-ROM) is attached to this projector to edit the image data for projecting. Installation of Media Card Imager is recommended. Refer to Owner’s Manual of Media Card Imager for installation and operation.

AVAILABLE CARD

SmartMedia (with PC Card Adapter) or Type PCMCIA-ATA Card can be used with this projector. (Those memory cards are supplied with this projector.)

Refer to SMARTMEDIA AND PC CARD ADAPTER on pages 38 and 39 for operation.

NOTE : Some PCMCIA Adapter or PC Card is not available for this projector and cannot provide the image data. In that case, use our SmartMedia and PC Card Adapter.

SELECTING MCI MODE

When the memory card is inserted into PC CARD SLOT, mode is automatically set to MCI mode and the first Page of the latest Index is projected on the screen. To turn Video/Computer mode to MCI mode manually, operate as follows.

DIRECT OPERATION		COMPUTER / MCI
Select MCI mode by pressing the MODE button on the Top Control	MODE button	button
	COMPUTER	COMPUTER
or the COMPUTER / MCI button on the Remote Control Unit.
	MCI	MCI
	VIDEO

MENU OPERATION

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button.

33