COMPUTER MODE

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT button(s) to move a red frame pointer to

 

SCREEN Menu icon.

2

Press POINT DOWN button and move a red frame pointer to the

 

function that you want to select and then press SELECT button.

Normal

Provides image to fit the vertical size of the screen.

Full

Provides image to fit the horizontal size of the screen.

True

Provides image in its original size. When the original image size is larger than screen size (1366 x 768), this projector enters Digital Zoom mode automatically. Image size can be set to Normal by pressing NORMAL button.

Digital Zoom

Adjusts image size or pans image. In “Digital Zoom” mode, the ON- SCREEN MENU disappears and the magnifying glass icon and the message “D. Zoom” is displayed.

This projector also enters Digital Zoom mode by pressing the D.ZOOM /button on Remote Control Unit.

Refer to the following for operation.

Expand function

To expand the image size, press the D.ZOOM button or the SELECT button. The image is magnified by degrees.

Compress function

To compress the image size, press the D.ZOOM button. The size of image is reduced by degrees.

Panning function

To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image is larger than the screen size.

To return to screen size previously set, press NORMAL button.

To cancel Digital Zoom mode, press any button except D.ZOOM

/, SELECT, POINT, NORMAL or AUTO PC ADJ. button.

SCREEN MENU

SCREEN Menu icon

Move the red frame to the function and press SELECT button.

NOTE

This SCREEN Menu cannot be operated when “HDTV720p,” “HDTV1035i” or “HDTV1080i” is selected on SYSTEM Menu (P23, 24).

True and Digital Zoom cannot be selected when “RGB” is selected on SYSTEM Menu (P23, 24).

This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.

The image data in other than XGA (1024 x 768) is modified to fit the screen size in the initial mode.

Panning function may not operate properly if the computer system prepared on PC ADJUST Menu is used.

30