PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT

TOP CONTROLS

AND INDICATORS

PROJECTION LENS

LENS COVER

BACK

EXHAUST VENTS

SPEAKERS

INFRARED

REMOTE RECEIVERS

HOT AIR EXHAUSTED !

Air blown from Exhaust Vents is hot. When using or installing projector, the following precautions should be taken.

Do not put any flammable object near these vents.

Keep the rear grills at least 3’(1m) away from any object, especially heat-sensitive object.

Do not touch this area, especially screws and metallic parts. This area will become hot while projector is used.

This projector detects internal temperature and automatically controls operating power of Cooling Fans.

POWER CORD CONNECTOR

TERMINALS

AND CONNECTORS

MAIN ON / OFF SWITCH

BOTTOM

AIR INTAKE VENTS (Side and Bottom)

This projector is equipped with Cooling Fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

Do not cover vent slots.

Keep bottom clear of any object. Obstructions may block cooling air.

LAMP COVER

ADJUSTABLE FEET

AND

FEET LOCK LATCHES

7