Fisher PLV-75, PLV-80, PLV-80L, PLV75L WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ), Auto, Mode, SVGA, COMPUTER INPUT, AUTOMATIC MULTI-SCANSYSTEM, SELECT COMPUTER SYSTEM MANUALLY

COMPUTER INPUT

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

When connect a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT UP/DOWN buttons to move a red arrow pointer to
	Input 2 and then press SELECT button. Source Select Menu will
	appear.
3	Press POINT UP/DOWN buttons and a red-arrow icon will
	appear. Move arrow to "RGB", and then press SELECT button.

NOTE;

INPUT SOURCE changes if the INPUT 2 button on Remote Control Unit is pressed.

INPUT MENU

InputSVGA1

Input 1		INPUT Menu icon
Input 2
		Move a pointer (red arrow) to
Input 3
		Input 2 and press SELECT
		button.
	Input 2

Source Select Menu

Move a pointer (red arrow) to RGB and press SELECT button.

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on pages 52-53). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set manually.)

The projector displays one of the Auto, -----, Mode 1/2/3/4/5/6/7/8/9/10, or the system provided in the projector.

Auto	When projector cannot recognize connected signal as PC
	system provided in this projector, Auto PC Adjustment
	function operates to adjust projector and message “Auto”
	is displayed on SYSTEM Menu icon.
	When image is not provided properly, manual adjustment
	is required. (Refer to P27 and 28.)

PC SYSTEM MENU

System Mode 1

PC SYSTEM Menu icon Displays system being selected.

––––There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 48.)

Mode 1 User preset adjustment in MANUAL PC ADJUSTMENT. Adjustment data can be stored in the Mode 1-10.

SVGA 1 Computer systems provided in the projector. The projector chooses proper system and displays it.

✽Mode 1 and SVGA 1 are examples.

SELECT COMPUTER SYSTEM MANUALLY

PC SYSTEM MENU

This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to move a red frame pointer to PC
	SYSTEM Menu icon.
2	Press POINT UP/DOWN buttons to move a red arrow pointer to
	system that you want to set, and then press SELECT button.

System

Mode 1

Mode 2

SVGA 1

SVGA 2

SVGA 3

Mode 1

PC SYSTEM Menu icon Displays system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~10) set in PC ADJUST Menu. (P27, 28)

25