APPENDIX
When a input signal is digital from DVI terminal, refer to chart below.
| RESOLUTION |
|
|
| RESOLUTION |
| ||||||
| DISPLAY |
|
| (kHz) |
| (Hz) |
| DISPLAY |
|
| (kHz) | (Hz) |
| 640 x 480 | 31.47 | 59.94 | ✳ | 1280 x 1024 |
| 60.276 | 58.069 | ||||
| 720 x 480 | 31.47 | 59.88 | ✳ | 1400 x 1050 |
| 63.97 | 60.19 | ||||
| (Progressive) |
| ||||||||||
| 768 x 575 | 31.25 | 50.00 |
| 1280 x 720 | 45.00 | 60.00 | |||||
| (Progressive) |
| (Progressive) | |||||||||
| 800 x 600 |
| 37.879 | 60.32 |
| 1280 x 720 |
| 37.50 | 50.00 | |||
|
|
| (Progressive) |
| ||||||||
| 1024 x 768 | 43.363 | 60.00 |
| 1920 x 1035 |
| 33.75 | 60.00 | ||||
|
| (Interlace) |
| |||||||||
| 1366 x 768 |
| 48.36 | 60.00 |
| 1920 x 1080 |
| 33.75 | 60.00 | |||
|
|
| (Interlace) |
| ||||||||
| 1360 x 768 |
| 47.70 |
| 60.00 |
| 1920 x 1080 |
| 28.125 | 50.00 | ||
|
|
|
| (Interlace) |
| |||||||
| 1376 x 768 |
| 48.36 |
| 60.00 |
| 1920 x 1080 | 33.75 | 60.00 | |||
|
|
|
|
|
|
|
|
| 1920 x 1080 |
|
|
|
| 1368 x 768 |
| 46.50 |
| 50.00 |
| 28.125 | 50.00 | ||||
| 1280 x 1024 |
|
|
|
|
|
| 1920 x 1080 |
|
|
| |
✳ |
| 63.98 |
| 60.02 |
| 27.00 | 48.00 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
✳Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.
NOTE : Specifications are subject to change without notice.
INDICATORS AND PROJECTOR CONDITIONCheck the Indicators for projector condition.
| Indicators |
|
| Projector Condition | ||
LAMP | WARNING | READY | LAMP |
| ||
REPLACE | TEMP. |
|
| |||
green | red |
|
| |||
yellow | red |
|
| |||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| The projector is OFF. (The AC Power Cord is unplugged.) | |
|
|
|
|
|
| |
✽ |
|
|
|
| The projector is READY to be turned on with the POWER ON- | |
|
|
|
| OFF button. | ||
|
|
|
|
| ||
|
|
|
|
|
| |
✽ |
|
|
|
| The projector is operating normally. | |
The Warning Temp. Indicator flashes red to let you know the internal temperature of the projector exceeds the normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator will go out. When the pro-
✽jector is cooled down enough and the temperature returns to nor- mal, the READY indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps flashing.) Check and clean the Air Filter.
|
|
| The projector is cooled down enough and the temperature |
✽ |
|
| returns to normal. When turning on the projector, the WARNING |
|
|
| TEMP. indicator stops flashing. Check and clean the Air Filter. |
|
|
|
|
• • • on | • • • flashing | • • • dim | • • • off |
53