VIDEO INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select INPUT source by pressing INPUT button on Top Control or on Remote Control Unit.

Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

INPUT button

Input 1

Input 2

Input 3

SELECTING INPUT SOURCE

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

When connecting to those equipment, select a type of Video source in SOURCE SELECT Menu.

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT buttons to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT UP/DOWN buttons to move a red arrow pointer to

 

Input 2 and then press SELECT button. Source Select Menu will

 

appear.

 

Move a pointer to source that you want to select and then press

INPUT MENU

Input

Input 1

Input 2

Input 3

SVGA 1

INPUT Menu icon

Move a pointer (red arrow) to Input 2 and press SELECT button.

3 SELECT button.

Video When video input signal is connected to VIDEO jack,

select Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

NOTE;

INPUT SOURCE changes if the INPUT 2 button on Remote Control Unit is pressed.

Input 2

Source Select Menu

Move a pointer (red arrow) to Video or

Y, Pb/Cb, Pr/Cr and press SELECT button.

WHEN SELECT INPUT 3 (AV TERMINALS )

When connecting to those equipment, select a type of Video source in SOURCE SELECT (VIDEO) Menu.

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT buttons to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT UP/DOWN buttons to move a red arrow pointer to

 

Input 3 and then press SELECT button. Source Select Menu will

 

appear.

3

Move a pointer to source that you want to select and then press

 

SELECT button.

Video When video input signal is connected to VIDEO jack, select Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

S-VideoWhen video input signal is connected to S-VIDEO jack, select S-Video.

NOTE;

INPUT SOURCE changes if the INPUT 3 button on Remote Control Unit is pressed.

INPUT MENU

InputSVGA 1

 

Input 1

 

INPUT Menu icon

 

 

 

 

 

Input 2

 

Move a pointer (red arrow) to

 

 

 

 

 

Input 3

 

 

 

 

 

Input 3 and press SELECT

 

 

 

 

button.

Input 3

Source Select Menu (VIDEO)

Move a pointer (red arrow) to source and press SELECT button.

31