Select Cleaning and then press the OK or Point 8 buttons. The screen is blacked out temporarily.
Turn the projector over. Loosen the screw that secures the hole cover, and then open the hole cover.
Put the blower’s nozzle into a hole.
Blow air into the projector with the blower watching the position of the dust from the screen.
When cleaning is done, pull the blower out of the hole and replace the hole cover and secure it with the screw.

Maintenance and Cleaning

Clean by using the Cleaning function in the Setting Menu

1 Turn the projector on and press the MENU button to display the On-Screen Menu. Select the Setting Menu with the Point ed buttons. Press the Point 8 or OK buttons to access the submenu items.

2

3

4

5

6

7 Set the projector back into the right position, then press any button on the top control or on the remote control to quit the Cleaning function.

*Do not open the hole cover except when you clean the inside of the projector to prevent foreign matters from getting into the projector. If it is open especially while operating the projector, the optical parts could damage.

Which hole to put the nozzle in?

When you look at the screen:

●When red spots (dust) are particularly noticeable, put the nozzle into the R panel cleaning holes.

●When green spots (dust) are particularly noticeable, put the nozzle into the G panel cleaning holes.

●When blue spots (dust) are particularly noticeable, put the nozzle into the B panel cleaning holes.

Cleaning

Select Cleaning in the

Setting Menu.

Loosen the screw that secures the hole cover.

The nozzle will go no further than a certain point when it is put into the hole. Do not attempt to push the nozzle further in, or it could break and be stuck inside of the projector.

Wave the nozzle back and forth inside of the projector.

(Do not attempt to bend the nozzle.)

Use only the supplied blower and nozzle. Do not use a commercially available compressed air duster. It causes the interior of the projector to malfunction with release of cold liquid propellant. We could not guarantee the malfunction of breakage by using other tools.

44