Fisher PLV-Z5, PLV-Z5BK Input, Input Source and System Selection

Input

Input Source and System Selection

Press the INPUT button on the top control or the INPUT buttons on the remote control (see below) to choose an input source.

✔Note:

•Before selecting an input source with these buttons, each input must be set on a proper signal form via menu operation (see on pages 25 – 26).

Top Control INPUT button

Video

S-video

Component 1

Component 2

INPUT button

HDMI 1

HDMI 2

Computer

INPUT buttons on the remote control

Press the VIDEO, S-VIDEO, C1/C2, H1/H2, or PC buttons on the remote control according to the input source.

VIDEO	When the video signal is connected to the VIDEO
	jack, press VIDEO.
S-VIDEO	When the video signal is connected to the S-VIDEO
	jack, press S-VIDEO.
C1/C2	When the video signal is connected to the Y-Pb/Cb-
	Pr/Cr jacks, press C1/C2.
	Component 1 ➜ Component 2 ➜ Component 1 ➜ • • • •
H1/H2	When the video signal is connected to the HDMI
	terminal, press H1/H2.
	HDMI 1 ➜ HDMI 2 ➜ HDMI 1 ➜ • • • •
PC	When the computer signal is connected to the
	COMPUTER connector, press PC.

✔Note:

•When switching from HDMI1 to HDMI2 or vice versa, the signal may be interrupted for a moment depending on the equipment.

Remote Control

COMPONENT HDMI

VIDEO C1/C2 H1/H2

INFO.

S-VIDEO PC

INPUT

CXVT

INPUT buttons

24