Part Names and Functions
Rear Terminal
q | w e | r |
COMPONENT 1 
SERVICEPORT
HDMI 1 HDMI 2 COMPUTER
COMPONENT 2
VIDEO Y Pb/Cb Pr/Cr
t | y |
qCOMPUTER
Connect the computer output signal, or RGB Scart 21- pin video output to this connector (p.17).
w
Connect the
eCOMPONENT 1 or COMPONENT 2
Connect the component video output signal to these jacks (p.16).
rSERVICE PORT
This jack is used to service the projector.
tHDMI 1/HDMI 2*
Connect the HDMI output signal from video equipment to these terminals (p.17).
yVIDEO
Connect the composite video output signal from video equipment to this jack (p.16).
*Note on the HDMI connector:
Use the HDMI connector less than the size shown below. Otherwise you cannot connect use HDMI 1 and HDMI 2 terminals at the same time.
Maximum dimensions of the HDMI connectors
0.94" (24 mm) | 0.59" (15 mm) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIDTHTHICKNESS
9