Fisher-Price 75972 manual Shutter

Assembly

		Shutter
Back	Lower Peg
Panel	Lower	Upper
	Hinge Hole
		Peg
		Upper
		Hinge
		Hole

Warning Label

•Position the back panel on a flat surface with the warning label facing up.

•Insert a shutter lower peg into the lower hinge hole on one side of the back panel.

•Fit and snap the shutter upper peg into the upper hinge hole on the same side of the back panel.

•Repeat this procedure to assemble the other shutter to the back panel.

Ladder Panel

Back

Panel

Hooked

TabsSlots

•Stand the assembly upright, as shown.

•Insert the hooked tabs on the ladder panel into the slots in the back panel.

Ladder	Back
	Panel
Panel

• To lock the ladder panel tabs into the back panel slots:

-Climb onto the ladder panel and stomp down until it snaps into place. (This may require alot of force.)

Ladder	Back Panel
Panel

Slots

Slot

Half Circle

Cut-out

Long Tabs

Platform

•Position the platform with the wood grain surface upright.

•Insert the long tab next to the half circle cut-out in the platform into the slot in the ladder panel.

•Insert the two long tabs on the side of the platform into the slots in the back panel.

7