Assembly
Upper | Safe |
Peg | |
| Door |
Front Trunk
Panel
Lower
Peg
Lower
Hinge
Hole
Upper Hinge Hole
•Position the front trunk panel on a flat surface with the inside facing up.
Helpful Hint: The safe door may be difficult to attach to the front trunk panel. Place a cloth under the front trunk panel to protect the surface. Apply a small amount of liquid soap to the pegs on the safe door.
•Position the safe door with the dial facing up. Insert the safe door lower peg into the lower hinge hole in the front trunk panel.
•Firmly push down on the safe door to snap the upper peg into the upper hinge hole in the front trunk panel.
Chalkboard
Front Trunk
Panel
Ladder
Panel
Slots 
Hooked
Tabs
Safe
•Stand the front trunk panel upright.
•Position the ladder panel so that the chalkboard is toward the safe on the front trunk panel.
•Insert the hooked ladder panel tabs into the slots in the front trunk panel.
Chalkboard
Label
Bottom
Edge
• Locate the ladder panel.
Upper Half
Label 
Ladder
Panel
Front Trunk | Ladder |
Panel | Panel |
Slots | Tabs |
|
•Make sure the area where the chalkboard label will be applied is clean and dry.
•Bend the chalkboard label in half lengthwise.
•Remove the backing from the upper half of the label.
•Align the bottom edge of the label with the bottom edge of the chalkboard outline on the ladder panel.
•Apply the top half of the label to the ladder panel and smooth the label downward.
•Remove the backing from the lower half of the label.
•Smooth the label downward.
Helpful Hint: You may need the help of another person with this assembly step.
•Turn the assembly upside down so that the ladder panel rests on a flat surface.
•Lift the assembly up and pound the ladder panel onto the surface to lock the tabs on the ladder panel into the slots in the front trunk panel.
5
