Crossbar
M5 Lock Nuts
M5 x 29 mm
Bolt
BACK VIEW
STEP 46
• Fit the ends of the crossbar to the upright tubes.
Tip: Make sure the white dot on one end of the crossbar and one of the upright tubes match. If they do not match, remove the crossbar and replace so that the white dots match.
•Fit two M5 lock nuts, rounded side out, to the hex holes in the crossbar (one at a time).
Rounded |
Side |
•Insert two M5 x 29 mm bolts through the upright tubes. While holding the lock nuts in place (one at a time) tighten the bolts.
•Repeat this procedure to fasten the other side of the crossbar to the upright tubes.
58
