
ASSEMBLY |
|
M6 x 35 mm |
|
Bolt |
|
Support Tube |
|
Small Hole | Plug |
| |
BACK VIEW | Crimped |
| End |
STEP 47
•Fit a plug into the crimped end of a support tube.
•Fit a support tube into the small hole in a base. Push the support tube down to snap into place. Make sure the support tube is fitted to the inside of the upright tube.
•Fit an M6 x 35 mm bolt through the outside of the upright tube and tighten.
Tip: Each plug (inside the support tube) includes an M6 lock nut.
• Repeat this procedure to assemble the other plug and support tube to the assembly.
59