Assembly
IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
Button Holes Up
Lower Leg | Foot |
1
•Position a lower leg so that it stands on a flat surface, as shown.
•Fit a foot onto the end of the lower leg.
•Insert a #8 x 1,3 cm screw through the bottom of the foot and into the lower leg. Fully tighten the screw with the Allen wrench.
•Repeat this procedure to assemble the other foot to the other lower leg.
Red Dot Up
Upper Leg
Straight
End
Button
Hole
Lower Leg
Upper Legs
3
•Position the fabric panel with the button holes up.
•Position the legs so that the feet are away from you.
•Slide the fabric panel onto the upper legs.
Rivet Through
Button Hole
Button Hole
4
•Fit the rivets on the upper legs through the button holes in top ends of the fabric panel.
2
•Position an upper leg so that the red dot is up.
•While pressing the button on the straight end of an upper leg, insert the upper leg into a lower leg. Make sure the button on the upper leg “snaps” into the hole in the lower leg.
•Repeat this procedure to assemble the other upper leg to the other lower leg.
4
